Specs:1. Main Unibody: Matt 3K, 3mm Carbon Fiber 2. 3D Printed Nylon Canopy 3. Black Aluminum M3 x 12mm Screws 4. Black Aluminum M3 Nylock Nuts 5. 20x200mm Guerrilla Drone Battery Strap with Silicon Grip Overall frame weight: 52g
Suggested ComponentsProps 3 inch Motors : 1407 or 1306 ESC's : 4 in 1 20A LiPo : 850mah 4s FC : All in One CL Racing, Betaflight, KISS FPV Camera: HS1177
HD Camera: Maybe, if you get creative... ;)
Here we go again... LittleTad-EX! Micro Quad to the NEXT LEVEL!!
We believe in revolution not evolution... So we present to you the Revolution of the LittleTad 137!designed with same simplicity in mind as his big brother the Afro BF-EX. We wanted to follow up on the success of the Afro and extended over to the micro size. The LittleTad-EX frame size is TINY! at 137mm across motor to motor and, made with high quality 3mm 3K twill carbon fiber MONO-PLATE, canopy is a Nylon 3D Printed pod, which is proven to be stronger than TPU and, better crash resistance.
DON'T FORGET TO ADD A SPARE CANOPY TO YOUR CART!!
The canopy was designed to reach extreme FPV Camera angle, up to 75-80 degrees (with the proper setup of PDB and FC ) for those Hard Core speed freaks!
Setup tips and Suggestions Page HERE