MicroTad-EX 90 Brushless
  • MicroTad-EX 90 Brushless
  • MicroTad-EX 90 Brushless

MicroTad-EX 90 Brushless

$40.00

Specs:

1. Main Unibody: 2mm Carbon Fiber
2. 3D Printed Nylon Canopy
3. Black M2 x 4mm Screws
4. Black M2 x 4mm Nylock Nuts

Overall frame weight: 13.5g

Suggested Components

Props: 2035 (50mm) 4 Blade
Motors : 1103 10000Kv
FC : OMNIBUS Betaflight 3.1 F3 with OSD
RX: Frsky XM+ Micro D16 SBUS
ESC's: 4 in 1 10A
FPV Camera: 600TVL 1/4 1.8mm CMOS FPV
VTX: VTX03 Super Mini 5.8G
LiPo : LiPo 450mah/45C 2S


After flying the MicroTad-EX Brushed and, feeling how responsive it was I got the itch for something around the same form factor but faster and, this is how the MicroTad-EX Brushless 90 was born.

While looking around the existing micro brushless quads, I found the possibility to go even smaller than 100mm and still be able to keep the same stretched frame form so, pushing it to fit around the 2" prop size, we were able to accomplish a 90mm motor to motor size.

MicroTad-EX! Brushless 90mm

Betaflight PID and Rates:
set pid_controller = MWREWRITE
set p_pitch = 40
set i_pitch = 34
set d_pitch = 25
set p_roll = 40
set i_roll = 34
set d_roll = 25
set p_yaw = 85
set i_yaw = 45
set d_yaw = 0

set rc_rate = 110
set rc_expo = 70
set rc_yaw_expo = 10
set thr_mid = 50
set thr_expo = 0
set roll_rate = 80
set pitch_rate = 80
set yaw_rate = 77
set tpa_rate = 10
set tpa_breakpoint = 1500


Videos

Related Products: